Service Manual

Chassis Page 5 - 28 GreensPro 1200

Drive Roller Assembly

Removal

(Figures 60 through 65.)

1. Park machine on a clean, level surface with the

transport wheels in the raised and locked position.

Make sure engine is OFF. Remove spark plug wire

from the spark plug.

2. Using a suitable lifting device, raise and support the

machine.

3. Remove transmission cover from machine (see

Transmission Cover in this section).

Figure 60

4. Remove nut (4) and flat washer (5).

5. Remove lock nut (1), two flat washers (2), cap screw

(7), flat washer (8), and spacer (3), and remove drive

chain tension assembly (6).

Figure 61

6. Remove retaining ring (9).

Figure 62

7. Remove two set screws (10).