Service Manual

GreensPro 1200 Page 5 - 33 Chassis
Chassis
Transport Wheel
Removal
(Figure 72.)
1. Park machine on a clean, level surface with the
transport wheels in the raised and locked position.
Make sure engine is OFF. Remove spark plug wire
from spark plug.
Figure 72
2. Remove four lug nuts (1).
3. Remove transport wheel and tire assembly (2).
Installation
(Refer to Figure 72.)
1. Install transport wheel and tire assembly (2) using
four lug nuts (1).
WARNING
2. Tighten lug nuts in an alternating pattern to 80 ft-lb
(108 N·m).
3. Adjust tire pressure to 10 psi (0.65 bar).
1
2
Failure to properly torque wheel lug nuts could
result in failure or loss of wheel and may result
in personal injury.