Service Manual

GreensPro 1200 Page 5 - 37 Chassis
Chassis
Lift Arm Catch Assembly
Removal
(Figure 75.)
Figure 75
1. Park machine on a clean, level surface with the
transport wheels in the raised and locked position.
Make sure engine is OFF. Remove spark plug wire
from spark plug.
2. Place blocks under transport wheels.
3. Release wheel lock (15), and allow transport wheels
to rest on blocks.
1. Lock nut (2 used) 5. Wheel lock plate 9. Lock nut 13. Spring 17. Nut
2. Nut (2 used) 6. Lock nut (2 used) 10. Flat washer (2 used) 14. Cap screw (2 used) 18. Linkage arm
3. Nut (2 used) 7. Nut 11. Nut (2 used) 15. Wheel lock assembly 19. Nut (LH threads)
4. Cap screw (2 used) 8. Flat washer (2 used) 12. Linkage arm assembly 16. Ball joint 20. Ball joint (LH threads)
4
5
17
18
19
20
16
12
11
10
10
12
1
3
4
15
14
6
13
9
8
7
14
6
3
2
2
1