Service Manual

GreensPro 1200 Page 5 - 41 Chassis

Chassis

Transmission Cover

Removal

(Figures 77 and 78.)

1. Park machine on a clean, level surface with the

transport wheels in the raised and locked position.

Make sure engine is OFF. Remove spark plug wire

from spark plug.

Figure 77

2. Remove lock nut (2), two flat washers (3), and cap

screw (4).

3. Tilt seat and seat pan (1) forward.

Figure 78

4. Remove cap screw (5) that secures transmission

cover (6) to support frame.

5. Remove transmission cover (6) from machine.

Installation

(Refer to Figures 77 and 78.)

1. Install transmission cover (6) to machine and secure

with cap screw (5).

2. Lower seat platform.

3. Secure seat platform with lock nut (2), two flat

washers (3), and cap screw (4).

2 3