Service Manual

GreensPro 1200 Page 5 - 43 Chassis
Chassis
Installation
(Figures 83 through 86.)
Figure 83
NOTE: Do not overtighten cap screws (2) when
installing the seat base. The seat base may not lift
properly if cap screws are overtightened.
1. Position seat pan (1) on machine and secure using
two cap screws (2), six flat washers (3), and two lock
nuts (4).
Figure 84
NOTE: It may be necessary to move the slide portion of
each adjuster rail to install cap screws.
2. Install seat adjuster rails (7) on seat (5) using four
cap screws (6).
Figure 85
3. Position adjuster rails equally and install seat (5)
securely onto seat pan (1) with four flat washers (8),
lock washers (9), and nuts (10).
4. Connect hour meter wire harness (11) to seat pan
(1).
Figure 86
5. Ensure the seat pan (1) is rotated in the down
position completely. Install cap screw (12), two flat
washers (13), and lock nut (14) to secure seat
assembly to machine.
1
2 3 4
2 3 4
6
5
6
7
7
6
6
8
11
1
9 10
5
1
14
12 13