Installation Instructions

ManualsBrandsToro ManualsAttachmentsArmrest Kit, GreensPro 1200 Greens Roller

FormNo.3375-919RevA

ArmrestKit

GreensPro™1200GreensRoller

ModelNo.44908

InstallationInstructions

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Leftarmrestbracket

Rightarmrestbracket1

Armrestpad2

Bolt(M10x45mm)

Locknut2

Spacer

Assemblethearmrest.

Bolt(M6x25mm)

Clipnut

Installthearmrest.

AssemblingtheArmrest

1.Alignaspaceroneachsideoftherightarmrestbracket

(Figure1).

2.Alignthespacersandtherightarmrestbracketwiththe

holesinthearmrestpad(Figure1).

3.Alignabolt(M10x45mm)withtheholesinthearmrest

pad,spacers,andthearmrestbracket(Figure1).

4.Threadanutontothebolt(M10x45mm)(Figure1).

5.Tightenthenutontotheboltuntilthenutandbolt

headareushwiththearmrestpad.

Note:Donotovertightenthenutandbolt.

6.Repeatsteps1through5toassembletheleftarmrest.

G019824

1 2

Figure1

1.Armrestpad

6.Clipnut

2.Rightarmrestbracket7.Nut

3.Leftarmrestbracket8.Bolt(M10x45mm)

4.Bolt(M6x25mm)9.Spacer

5.Seatpanange10.Armrestbracket(left

shown)

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

*3375-919*A

Summary of content (2 pages)

PAGE 1
Form No. 3375-919 Rev A Armrest Kit GreensPro™ 1200 Greens Roller Model No. 44908 Installation Instructions Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. 1 1 2 2 2 4 6 6 Left armrest bracket Right armrest bracket Armrest pad Bolt (M10 x 45mm) Locknut Spacer Bolt (M6 x 25mm) Clip nut Assemble the armrest. Install the armrest. 7 Assembling the Armrest 1 1. Align a spacer on each side of the right armrest bracket (Figure 1). 8 2 1 2.
PAGE 2
Installing the Armrest 1. Insert the clip nuts over each hole of the seat pan flange (Figure 1). 2. Align the completed right armrest with the holes found on the right side of the seat pan flange (Figure 1). 3. Insert a bolt (M6 x 25mm) into each hole of the armrest and clip nuts (Figure 1). 4. Tighten the bolts. 5. Repeat steps 1 through 4 to install the left armrest.