Operator's Manual

g279901
Figure37
1.Filterhead
2.Hydrauliclter
3.Carefullyremovethehydrauliclter(Figure37).
4.Fillthereplacementlterwiththespecied
hydraulicuidandlubricatethesealinggasket
withhydraulicuid.
5.Installthelterontothelterheadbyhand
(Figure37)untilthegasketcontactsthelter
head,thentightenthelter3/4turnfurther.
6.Wipeupanyspilledhydraulicuid.
7.Disposeoftheoldlteraccordingtolocalcodes.
FillingtheHydraulicReservoir
1.Lowerthemachineontotherollers;referto
LowertheMachineontotheRollers(page18).
2.Removethehydraulic-reservoircap(Figure38).
g279900
Figure38
3.Fillthereservoirwiththespeciedhydraulic
uid;refertoHydraulicFluidSpecications
(page31)andCheckingtheHydraulic-Fluid
Level(page31).
4.Installthereservoircap(Figure38).
5.Wipeupanyspilledhydraulicuid.
6.Starttheengineandrunitatlowidlefor3to5
minutes.
Runningtheenginecirculatesthehydraulicuid
andremovesairtrappedinthehydraulicsystem.
7.Checkthemachineforhydraulicleaksatthe
reservoir,hydraulichoses,andthehydraulic
lter.
Repairallhydraulicleaks.
8.Shutofftheengine,checkthehydraulic-uid
level,andadduidifnecessary.
9.Lowertheoperator’sseat;refertoLoweringthe
Operator’sSeat(page23).
33