Operator's Manual

Forexample:Iftheuidisatambient-air
temperature,about24°C(75°F),llonlytothe
coldlevel.Iftheuidisabout65°C(150°F),ll
tohalfwaybetweenthehotandcoldlevels.
5.Replacethehydraulicreservoircapandtighten
ituntilitissnug.
Important:Donotovertightenthereservoir
cap.
6.Wipeupanyspilleduid.
7.Lowertheoperator’sseat;refertoLoweringthe
Operator’sSeat(page23).
ChangingtheHydraulic
FluidandFilter
ServiceInterval:Aftertherst20hours—Change
thehydraulicuidandlter.
Every400hours—Changethehydraulicuid
andlter.
Important:Useonlythespeciedhydraulicuid.
Otheruidscouldcausesystemdamage.
PreparingtoChangetheHydraulic
FluidandFilter
1.Driveortransportthemachinetoalevelsurface;
refertoTransportingtheMachine(page16).
2.Ifyouruntheengine,shutofftheengine.
3.Engagetheparkingbrake.
4.Ifthemachineisontherollers,raiseitontothe
transportwheels;refertoRaisingtheMachine
ontotheTransportWheels(page16).
5.Raisetheoperator’sseat;refertoRaisingthe
Operator’sSeat(page22).
6.Ifyouruntheengine,waitfortheengineand
hydraulicsystemtocool.
DrainingtheHydraulicFluid
1.Alignadrainpanwitha2L(2USqt)capacity
underthehydraulicreservoir(Figure36).
g279899
Figure36
1.Hydraulic-supplyhose
2.Hydraulictting(reservoir)
2.Removethehydraulic-supplyhosefromthe
ttingofthereservoir,andallowthehydraulic
uidtodraincompletely(Figure36).
3.Installthehydraulichosethatyouremovedin
step2.
4.Wipeupanyspilledhydraulicuid.
5.Disposeofthewastehydraulicuidaccording
tolocalcodes.
ChangingtheFilter
ServiceInterval:Aftertherst20hours—Change
thehydraulicuidandlter.
Every400hours—Changethehydraulicuid
andlter.
1.Cleantheareaaroundthelterheadand
hydrauliclter.
2.Packragsunderthehydrauliclter(Figure37).
32