Operator's Manual

•Inthefrontholes,useabolt(M10x100
mm),2washers(M10),andalocknut(M10).
•Intherearholes,useabolt(M12x100mm),
2washers(M12),andalocknut(M12).
•Ifyourmachinehasathirdwasherincluded
witheachbolt,usethosewashersasspacers
betweenthehitchandtheinsideofthehitch
pivotbracket(Figure6).
Note:Usetheholesinthehitchpivotbracketto
matchthehitchheightofthetow-vehiclehitch.
g025914
Figure5
1.Hitch
5.Washer—M12(2)
2.Hitchpivotbracket
6.Bolt(M12)
3.Washer—M10(2)7.Locknut(M12)
4.Bolt(M10)8.Locknut(M10)
g025915
Figure6
1.Spacerwashers
3.Tightenthesmallboltto73N∙m(54ft-lb)and
thelargeboltto126N∙m(93ft-lb).
4.Pushuponthehitchassemblyuntilthelatch
leverisunlockedfromtheslidedetent(Figure7).
g024011
Figure7
1.Latchlever
5.Pullthehitchdown.
6.Steponthehitchpedaluntilthehitchlocksinto
place(Figure8).
9