Service Manual

InstallingtheHydraulicHosesandTubes(continued)
A.Useawrenchtotightentheswivelnutontothettinguntilyoufeellight
resistancewiththewrench;approximately3.39N∙m(30in-lb).
B.Putamarkontheswivelnutandbodyofthetting.Holdthehose/tubein
alignmentwithawrenchtopreventthehose/tubefromturning(Figure15).
g221222
Figure15
1.Marknutandttingbody
3.Initialposition
2.Finalposition4.Extendline
Note:Themarkingsonthenutandbodyofthettingshowthatthe
connectioniscorrectlytightened.
C.UseasecondwrenchtotightenthenuttothecorrectFlatsFromWrench
Resistance(FFWR).
GreensPro
™
1240/1260
Page5–13
HydraulicSystem:GeneralInformation
14211SLRevA