Operator's Manual
Page 26 Operating Instructions
Option Control
• To turn on the option, press the “option start”
button on the control pendant.
• To turn off the option, press the “option stop”
button on the control pendant.
WARNING: Do not leave the option
running while unattended.
I
MPORTANT: Do not press the “option start” button
on the control pendant without an option connected.
This can damage the hydraulics on the MH-400.
Storing/Recalling a Preset on EH Models
The control pendant has the ability to store 6 pre-set
speeds for the belt and the option. The current speeds can
be stored as a pre-set so that they can quickly be recalled.
To Store:
1. Press the “Store/Recall presets” button square
brackets will appear in the centre of the bottom line
of the display.
2. Press and hold button 1 through 6 for 3 seconds, the
square bracket will begin flashing. The current belt
and spinner speed will be stored to that preset.
To Recall:
1. Press the “Store/Recall presets” button square
brackets will appear in the centre of the bottom line
of the display.
2. Press button 1 through 6. The preset belt and spinner
speed for that button will become the current belt and
spinner speed.