Operator's Manual

Important:Alwaysremovetheon/offpendant
switchcordordisconnectthepowersupplywire
whenthemachineandtowvehiclearenotin
use.Otherwise,thetowvehiclebatterywilllose
power.
EHModels
1.Mountthesocketbrackettotherearofthetow
vehiclewith(2)5/16x1inchscrewsandnuts.
2.Routethewireharnessconnectorthroughthehole
tothesocket.Slidethebootdowntheharnessifthe
connectordoesnotgothroughthehole.
3.Securethewireharnesssockettothebracketwith
(2)1/4x1inchscrewsandnuts(
Figure10).
4.Connectthefusedwiretothepositiveconnectorand
theotherwiretothegroundtothebattery.
5.Attachthebaseunitwiringharnesstothetowvehicle
wiringharness(
Figure10).Theconnectorislocated
amongthehydraulichoseattachedtothetowvehicle.
Figure10
1.AttachBatteryHarnesstoSolenoidHarness
6.Ensurethatallthewireharnessesareinstalled
correctlyandtightened.
6
InstallingtheTowVehicle
BrakeComponents(Models
44931&44934only)
Partsneededforthisprocedure:
1Footcontroller
1Loadcontroller
1
Socketconnectorharness
1
Shortwireharness
1
Socketbracket
1Fusedharness
1Loadcontrollerbracket
2Tinnermannut
2
Screw,#10x3/8inch
4
Screw,5/16x1inch
4
Nut,5/16inch
6Wiresplices
1
Cabletie
2
Screw,1/4x3/4inch
2
Nut,1/4inch
Procedure
Note:Layouttheharnessonthetractortodetermine
themountinglocationsoftheharnesscomponents.
Cabletiesaresuppliedtoretainanysurpluscable
lengths.Also,wiresplicesareprovidedifthelengthof
theharnesshavetobealtered(shortenedorlengthened).
Heattheshrinkconnectorsuntiltheyshrinktightonto
thewires.
Important:Iflengthisaddedtotheharness,make
suretousethepropergaugewire.
1.Mountthesocketbrackettotherearofthetow
vehiclewithtwo5/16x1inchscrewsandnuts.
2.Routethewireharnessconnectorthroughthehole
tothesocket.Slidethebootdowntheharnessifthe
connectordoesnotgothroughthehole.
3.Boltthewireharnesswiththesocketconnectorto
therearofthesocketbracketwithtwo5/16x1inch
screwsandnuts.
4.Routetheharnessalongthetowvehicle.
14