Operator's Manual
UnloadingMaterial
WARNING
Donotstandbehindthemachinewhileunloading
BulkUnloading
1.Backthemachineintothelocationwhereyouwant
thematerialdeposited.
2.Releasethereargatelatchesandturnonthe
conveyorbelt.
3.Ifdesired,raisetherearofthemachine.This
unloadsmaterialatadifferentangle,andallows
quickunloadingoftheentireload.
ControlledUnloading
1.Closethereargatelatches.
2.Usethejackhandletoopenorclosetheadjustable
sectionofthereargate(
Figure27andFigure28).
Thisrestrictstheowofmaterialswhenusingan
option.
Figure27
1.Reargate2.Feedgatejack
Figure28
1.5inch(12.5cm)maximum
opening
2.Feedgate
UnloadingIntoSmallerMachines
1.Raisetherearofthemachinehighenoughto
accommodatethesmallermachineunderneath.
2.Followtheprocedureforbulkunloadingor
controlledunloading.
CAUTION
Usetheadjustablesectionofthereargateonly
whenunloadingmaterialsmallerthan1inch
(25mm)indiameter,suchassandorgravel.
CAUTION
Openthereargatecompletelyifmaterialwill
notowthroughtheadjustablesection.Test
eachnewmaterialrst.
31