Setup Instructions

Page 6 Setup Instructions
How to Set Up the Option Caddy (2)
The option caddy is designed for one person to easily lift,
transport, and mount the cross conveyor, with or without
the swivel kit, onto the MH-400.
1. Remove all wooden shipping blocks and banding
before proceeding with installation.
2. Install the handle into the frame and secure using the
provided pins (2).
3. Check that the tire pressure on all tires is
206 kPa (30 psi) maximum.
How to Set Up the Twin Spinner
1. Remove the rubber scraper and retainer bar from
their shipping position. Install them (Figures 15 and
16) using the supplied 7.8 x 25 mm (5/16 x 1 in)
GR8 bolts, washers, and nylon locking nuts. Ensure
the vertical portion of the rubber scraper is on the
same side as the hopper opening (Figures 15 and 16).
2. Insert the handles into the handle openings
(Figure 15).
Figure 15: Twin Spinner handle openings
3. Securely fasten the handles with washers and nuts
(Figure 16).
Figure 16: Install Twin Spinner handles
4. Remove the hopper front guard from its shipping
position.
5. Turn it around and install it using the supplied
6.25 x 15.6 mm (¼ x ⅝ in) GR8 bolts, washers, and
nylon locking nuts (Figures 17 and 18).
6. Install the Twin Spinner into the quick-attach
brackets at the rear of the MH-400 (see How to
Mount the Options in the Operator’s Manual).
Figure 17: Hopper front guard