Operator's Manual

7.Securetherubberboottotheconnectorandto
thewireharnesswithacabletie.
8.Securealllooseharnesswireswithcableties.
9.Ifyouareusinga4wheelbrakekit,removethe
10ampfusefromthefuseholderandinsertthe
15ampfuse.
5
InstallingtheEHWireless
ControlMountingBracket
ontheTractionUnit
Model44954Only
Partsneededforthisprocedure:
1Mountingbracketassembly
1Backingplate
4
Flangeheadbolt,5/16x1-1/2inch
4
Flangeheadlocknut,5/16
Procedure
1.Fortractionunitmounting,determinean
appropriatelocationforthehandheldremote
mountingbracket.Thesurfaceshouldbeat
andsolid.
2.Usingthebackingplateasatemplate,locate,
mark,anddrill4holes(11/32inchdiameter)in
thetractionunitmountingsurface.
3.Attachthemountingbracketandbackingplate
with4angeheadbolts(5/16x1-1/2inches)
andangelocknuts(Figure10andFigure11).
g028873
Figure10
1.Handheldremote3.Mountingbolts
2.EHhandheldremote
mount
g014103
Figure11
1.EHhandheldremotebackingplate
Note:Thewirelessremotemagnetcansticktoany
metalcomponent.
14