Operator's Manual

About the MH-400 Material Delivery Unit Page 5
About the MH-400 Material
Delivery Unit
The MH-400 Material Delivery Unit is a low-impact
multi-purpose work trailer designed for the turf grass
maintenance industry.
Features and Benefits
• It is offered in two models, one with standard
hydraulics (SH) and one with electric hydraulics (EH).
• It can be used for a variety of everyday material
handling and relocation tasks without an option.
• The four-wheel walking beam suspension follows the
contours of uneven surfaces, while providing a smooth
ride, and maintaining even weight transfer to the
ground.
• It comes standard with specially designed, high-
flotation, 10-ply turf tires. Designed to provide
minimum ground compaction, with maximum support
and maneuverability.
• It is easy to learn and operate. One person can operate
the on/off pendant switch from the driver’s seat on the
SH model, or the switch can be bypassed for
continued operation—no down time.
• The control pendant on the EH model allows full
control of the MH-400 and its options from the
driver’s position.
• Options can be easily installed or removed in
minutes—no tools required.
• The option caddy allows one person to install or
remove an option in minutes—no heavy lifting
required.
• The lower, wider body provides maximum stability.
• Customers can install a four-wheel electric brake
system for maximum braking performance. The brake
controller and foot pedal are mounted on the tow
vehicle. This allows synchronous braking with the tow
vehicle.
• The seamless, triple layer, 9.4 mm (⅜ in) thick belt
enhances durability.
• The triple-sealed rollers provide long-lasting high
performance and require virtually no maintenance.
• The bi-directional conveyor belt allows materials and
supplies to be loaded into the MH-400, as well as
unloaded.
• The multi-position rear gate can be adjusted from a
closed position up to 12.5 cm (5 in) open to pass
material. It can be locked into position, as well as
unlocked or removed.
• The rear hitch provides versatility-use the MH-400
with trailed vacuum systems, wood chippers, and
levelling devices.
• It can fully load smaller machines, such as the ProPass
200.
Spreading Options
For more information on the following options, contact an
authorized TORO distributor.
Twin Spinner Option
The Twin Spinner option can handle a wide variety of
materials, with spread widths of 4.5–12 m (15–40 ft) for
light or heavy top dressing applications.
Cross Conveyor Option
Use this option to move and place materials at varying
heights from 28–180 cm (11–72 in) off the ground.
Swivel Kit Option
Use this option in conjunction with the cross conveyor. It
allows you to move and place material in any direction
with a 270 degree range from the rear of the MH-400. The
swivel action is useful for filling ditches and sand traps.
MH Processor Option
Use this option to screen a wide variety of material. The
option discharges desired material directly onto the ground
and unwanted material collects at the bottom of the
conveyor.