Operator's Manual

hasaninlineonewaycheckvalve.Also,thereisan
arrowonthecheckvalvewhichshouldfacetoward
thetowvehicle.
g014116
Figure8
1.Pressurein2.Returnout
Important:Donotallowthehydraulichoses
andthepowercabletodragonthegroundwhen
operatingthemachine.Avoidlocationswhere
theycouldbecomepinchedorcut.
5
InstallingtheWiringforthe
TowVehicle
Partsneededforthisprocedure:
1
SHPendant(model444931)
1
SHWireharness(model44931)
1
EHWireharness(model44954)
1
Bracket(model44954)
2
Bolt,5/16x1inch(model44954)
2
Nut,5/16inch(model44954)
2
Bolt,1/4x1inch(model44954)
2
Nut,1/4inch(model44954)
SHModels
1.Runthebatterywiringharnessthroughthetow
vehicleanduptothebattery.
2.Connectthefusedwiretothepositiveconnector
andtheotherwiretothegroundtothebattery.
3.AttachtheSHbatterywiringharnesstothe
solenoidwiringharnesscomingfromthebase
unit.Theconnectorislocatedamongthe
hydraulichoseattachedtothetowvehicle.
4.OnSHmodelsplugtheon/offpendantswitch(4
prongend)intothesocketatthefrontleftcorner
ofthemachine(Figure9).
g014074
Figure9
1.On/offpendantswitch(SHModels)
5.Ensurethatallthehoseconnectionsandwire
harnessesareinstalledcorrectlyandtightened.
Important:Alwaysremovetheon/off
pendantswitchcordordisconnectthe
powersupplywirewhenthemachineand
towvehiclearenotinuse.Otherwise,the
towvehiclebatterywilllosepower.
EHModels
1.Mountthesocketbrackettotherearofthetow
vehiclewith2bolts(5/16x1inch)andnuts.
2.Routethewireharnessconnectorthroughthe
holetothesocket.Slidethebootdownthe
harnessiftheconnectordoesnotgothrough
thehole.
3.Securethewireharnesssockettothebracket
with2bolts(1/4x1inch)andnuts(Figure10).
4.Connectthefusedwiretothepositiveconnector
andtheotherwiretothegroundtothebattery.
5.Attachthebaseunitwiringharnesstothe
towvehiclewiringharness(Figure10).The
connectorislocatedamongthehydraulichose
attachedtothetowvehicle.
11