Operator's Manual

g014125
Figure51
1.Extendedpositionwhenconveying
5.Swivellockpin
2.Centeredpositionwhentraveling6.Removeoripupthedeector
3.Crossconveyor7.Materialoutlet(motorend)
4.Swivelkit
SpreadingMaterialfromtheCross
Conveyor
1.Turnoffthetowvehicle.
2.OnSHmodelsusingthecontrollevers,turn
ontheoptionandtheconveyorbelt(unload
position).
3.Opentheadjustablesectionofthereargateto
allowforthedesiredowrate.Youmayhaveto
experimentuntilyougetthedesiredowand
spreaddepth.Othervariablesincludeground
speedandthetypeofmaterial
4.Turnonthetowvehiclehydraulics.
5.OnEHmodelsoperatetheoptionandthe
conveyerbeltwiththewirelessremote.
6.OnSHmodelsturnoffthetowvehiclehydraulics
tostopmaterialmovement,orturnofftheon/off
pendantswitch.
Note:ForSHmodelstheon/offpendantswitch
stopsthemachineconveyorbelt,notthecross
conveyor.
7.Whennishingusingthecrossconveyor,always
returnittothecenterposition.
OperatingtheSwivelKit
Todirecttheowofmaterialfromthecrossconveyor
inanydirection,pullupthespring-loadedlockingpin
ontheswivelkitintotheunlockoropenposition.This
allowsyoutomanuallymovethecrossconveyorfreely
fromsidetosideontheswivelbearing(Figure51).
Tokeepthecrossconveyorinaxedposition,release
thespring-loadedlockingpinintooneoftheve
lockingpositionsontheswivelkit.
Note:Whentravelingoveruneventerrain,raise
themachinetothemaximumsafetravelingrange.
Thisprovidesmoregroundclearanceforthecross
conveyor/swivel.
g015027
Figure52
1.Hydrauliccontrols
3.Cylinder
2.Arrow
41