Operator's Manual

Description
Qty.
Use
DeclarationofConformity
1
EUproofofcertication
Attachmentclamps2Usetomountattachments
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
1
InstallingtheHitch
Partsneededforthisprocedure:
2
Bolt,1x6-1/2inch
2Locknut,1inch
Procedure
1.Locateandremovetheloosepartsboxshipped
onthefender.
2.Removetherearsupportlegfromtheshipping
positionandplaceitinthedownposition.
3.Removethehitchfromtheshippingposition
bycuttingbothstrapssecuringthehitchto
thefender(Figure3).Removebothmounting
bracketsfromthefenderanddiscard.
g014065
Figure3
1.Removehitchfromshippingposition
Note:Twopeoplearerequiredtoremovethe
hitchassembly.
4.Slidethehitchtubetongueintoplaceatthefront
ofthemachine.Ensurethatthejackmounting
bracketfacesouttowardstheleftside.
5.Placeabolt(1x6–1/2inch)throughtheframe
andhitchtubeandsecureitwithalocknut
(Figure4).Torquethelocknutto976to1,193
N-m(720to880ft-lb).
6.Placeabolt(1x6–1/2inch)throughthetopof
theframeanddownthroughthehitchtubeand
secureitwithalocknut(Figure4).Torquethe
locknutto976to1,193N-m(720to880ft-lb).
g014066
Figure4
1.Hitchtube2.Mountingboltandnut
7.Removethejackassemblyfromtherearleg.
Installthejackassemblyontothehitchtube,
placingthepinhorizontally.
Note:Donotplacethepinthroughthetophole
ofthejack,oryouwillnotbeabletoremovethe
pinwhentheweightcaseissecuredtothehitch.
2
InstallingtheWeightCase
NoPartsRequired
Procedure
1.Removetheweightsfromtheweightcase.
2.Removethebolts(1/2x5-1/2inch)fromthe
mountingbracketholdingtheweightcase.
Discardthemountingbrackets(Figure5).
9