Operator's Manual

powersupplywirewhenthemachineand
towvehiclearenotinuse.Otherwise,the
towvehiclebatterywilllosepower.
EHModels
1.Mountthesocketbrackettotherearofthetow
vehiclewith2bolts(5/16x1inch)andnuts.
2.Routethewireharnessconnectorthroughthe
holetothesocket.Slidethebootdownthe
harnessiftheconnectordoesnotgothrough
thehole.
3.Securethewireharnesssockettothebracket
with2bolts(1/4x1inch)andnuts(Figure10).
4.Connectthefusedwiretothepositiveconnector
andtheotherwiretothegroundtothebattery.
5.Attachthebaseunitwireharnesstothetow
vehiclewireharness(Figure10).Theconnector
islocatedamongthehydraulichoseattached
tothetowvehicle.
g014100
Figure10
1.Wireharnessconnector
6.Ensurethatallthewireharnessesareinstalled
correctlyandtightened.
6
InstallingtheTowVehicle
BrakeComponents
Partsneededforthisprocedure:
1Footcontroller
1Brakecontroller
1Harnessassembly
1
Socketbracket
4
Screw(5/16x1inch)
4
Nut(5/16inch)
6Wiresplices
10
Cabletie
2
Bolt(#10x7/8inch)
2
Nut(#10)
1Hoseclamp
Procedure
Note:Layouttheharnessonthetractortodetermine
themountinglocationsoftheharnesscomponents.
Cabletiesaresuppliedtoretainanysurpluscable
lengths.Also,wiresplicesareprovidedifthelength
oftheharnesshavetobealtered(shortenedor
lengthened).Heattheshrinkconnectorsuntilthey
shrinktightontothewires.
Important:Iflengthisaddedtotheharness,
makesuretousethepropergaugewire.
1.Mountthesocketbrackettotherearofthetow
vehiclewith2bolts(5/16x1inch)andnuts.
2.Routethewireharnessconnectorthroughthe
holetothesocket.Slidethebootdownthe
harnessiftheconnectordoesnotgothrough
thehole.
3.Boltthewireharness,withthesocketconnector,
totherearofthesocketbracketwith2bolts
(5/16x1inch)andnuts.
4.Routetheharnessalongthetowvehicle.
5.Mountthebrakecontrollertothetractordashor
thefenderwiththe2bolts(#10x7/8inch)and
nuts(#10).
6.Usingthehoseclamp,securethefootcontroller
tothepadonthetowvehiclebrakepedal.
7.Connecttheharnesstothecomponents(Figure
11)asfollows:
13