Operator's Manual

indicatingthattheremoteisinaset-onlymode.In
thisset-onlymode,youcanadjusteithersettingup
ordown,buttheoorandoptiondonotactivate,
remainingoff.Thisallowsyoutosetthedesired
speedsorusethestoredsettingswithoutcausing
unwantedmovement.Aftersettingthespeeds,press
theALLSTARTbuttontoactivatetheoorandoption
atthechosensetting(ifthehydraulicsareengaged,
theoorandoptionwillstart).PressALLSTARTathird
timetostorethecurrentvalueinmemory.
Note:Changestothesettingswhiletheoorand
optionarerunningareimmediatelyeffective,butthey
aretemporaryunlessyoustorethenewsettingby
pressingALLSTARTagainafterchangingthesetting.
Forinstance,youmakeanadjustmentwhilethe
displayshowsFLRSandOPTS,pressALLSTART
startingtheoorandoptionattheadjustedsetting,
andthenturntheremoteoffwithoutpressingALL
STARTagain,storingthechange.Thenexttime
youusetheremote,thesettingswillreverttothe
previouslystoredvalues.
Note:A10secondtimerstartswhenyoupressALL
STARTandset-onlymodedisplays.Ifyoudonotpress
abuttonduringthe10secondinterval,thedisplay
revertstoFLRandOPT,thepreviousstate/value
displays,andthepreviousstate/valueisenforced.
Thetimerresetstotensecondsifanybuttonis
pressedwhiletheremoteisintheset-only.
1.PresstheALLSTARTbutton.
ThepreviewvaluesandFLRSandOPTS
display.
2.Adjustthespeedsettingsasfollows:
•Adjusttheoorspeedsettingusingtheusing
theINCREASEFLOORSPEEDbuttonorthe
DECREASEFLOORSPEEDbutton.
or
•Adjusttheoptionspeedsettingusingthe
usingtheINCREASEOPTIONSPEEDbuttonor
theDECREASEOPTIONSPEEDbutton.
or
3.PresstheALLSTARTbuttontoruntheoorand
option.
4.PresstheALLSTARTbuttontostorethevalues.
ThedisplayshowsALLSTORE.Thesetvalue
willbeusedwhenevertheoptionisstartedin
thefutureuntilyouchangethesettingagain.
Note:Boththeoorandoptionmustberunning
tostorethesettingsusingtheALLSTARTbutton.
Ifonly1orneitherarerunning,pressingtheALL
STARTbuttonwilleitherstartthembothorstart
the1thatwasnotrunning.Nothingisstored
andthecommandspreviewedarethepreviously
storedoorandtheoptionsettings.
Itisimportanttorealizethatthestoredcommand
fortheoorandoptionareusedtwice,oncein
theeventofanindividualcommandusingthe
FLOORSTARTorOPTIONSTARTbuttons,and
onceintheeventofacombinedactionusing
ALLSTART;ineithercase,itisthesamenumber.
SettingthePreset1,2,and
3Buttons
Theremotehas3PRESETbuttonswhichyoucan
programwithoorandoptionspeedsettings.Each
PRESETbuttonactslikeapreviewmodefortheALL
STARTbutton,exceptthattheyusedifferent,user
denedquickreferencespeedvalues.
Iftheoorand/ortheoptionhappentoberunningat
thetimeyoupressaPRESETbutton,apreviewvalue
ofbothoorandoptionsettingsisdisplayed;ifyou
thenpresstheALLSTARTbutton,thecurrentoperating
valuesarereplacedbythepresetvalues.Ifyoudo
notpresstheALL-STARTbuttonwithin10seconds,the
systemwillrevertbacktothepreviouslystoredvalues.
Usethefollowingproceduretosetthevaluesofa
PRESETbutton:
1.Startboththeoorandoptioneitherindividually
orbyusingtheALLSTARTbutton.
2.Setthedesiredspeedsofbothoorand
optionbyusingtheappropriateINCREASEand
DECREASEspeedbuttonsforeachoutput.
3.PressandholdtheSTOREbuttonandthenpress
thedesiredPRESETbutton(1,2,or3).
34