Operator's Manual

8.Gototherightfrontcornerandremovethe
lockingcollarthatholdsthepillowblockbearing
ontheshaft.Dothisbybackingoffthesetscrews
andturningthelockingcollarcounterclockwise.
Usingahammerandpunch,tapthelockingcollar
counterclockwiseuntilitreleasesfromtheshaft.
9.Repeatthisstepfortheleftfrontcorner.
10.Removethepillowblockbearingsbyslidingtheidler
rollerbacksothepillowblockbearingsslideoutof
theirguides.
11.Removethetwosafetybracketsandslidetheroller
downthroughtheopenhole.
12.Gototherearofthemachineandloosenthe
tensioningsprocket.
13.Removethechainfromthedrivesprocket.
14.Loosenthesetscrewsonthedrivesprocketand
removethedrivesprocketandkeyfromthedrive
rollershaft.
15.Supportthereardriveroller.
Important:Donotdisturbtherearroller
adjustmentbracketassembly.Itisdesignedto
adjusttherearrollerautomaticallyifthebeltis
nottrackingaccurately
16.Removethefourboltsintheangebearingsonboth
sides.
17.Removethelockingcollarsnexttotheange
bearingsontheshaft,andslidebothbearingsoff
theshaft.
18.Removethetwooptionattachmentbrackets
(
Figure47).
Figure47
1.Optionattachmentbracket
19.Lowerthedriverollerdownthroughtheslots.
20.Removethereargateforabetterview .
21.Notethepositionofthecartridgeinsidethehopper,
sothatyoucanreinstallitinthesamepositionand
direction.Itisboltedinsixplacesalongthesideof
themachine(three4boltplatesoneachside).
22.Securethecartridgebyusingstrapsfromalifting
deviceoneachofthefourcorners.
23.Removethe(24)boltstoreleasethecartridge
(Figure48).
Figure48
1.Secureandremovethebeltcartridge
24.Removethecartridgebyliftingitoutfromthetopof
themachine.Placeitontheground(Figure49).
Figure49
InstallingtheBelt
Toinstallanewbelt,reversetheaboveinstructions,
butkeepinmindthefollowingimportantnotesand
instructions.
Important:Theconveyorbeltisdesignedtowork
primarilyinonedirection.Ensurethatthepainted
arrowinthemiddleofthebeltispointingtowards
therearofthemachine(lookingdownfromabove).
44