Installation Instructions

FormNo.3444-669RevB

WingKit

QuickGroom710

ModelNo.46406AA

ModelNo.46406BA

InstallationInstructions

Important:ThiskitisnotcompatiblewiththeTowableElectricLiftKit.

Installation

PreparingtheMachine

NoPartsRequired

Procedure

1.Parkthetractionunitandattachmentonalevel

surface.

2.Engagethetractionunitparkingbrake.

3.Lowertheattachment.

4.Shutoffthetraction-unitengineandremovethe

key.

InstallingtheWings

Partsneededforthisprocedure:

2Wing

Procedure

1.Ateachcorner,removethebolt,nut,andspacer.

g349786

Figure1

1.Nut3.Bolt

2.Spacer

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com/bullseye.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3444-669*

PAGE 1
Form No. 3444-669 Rev B Wing Kit QuickGroom 710 Model No. 46406AA Model No. 46406BA Installation Instructions Important: This kit is not compatible with the Towable Electric Lift Kit. 2 Installation 1 Installing the Wings Preparing the Machine Parts needed for this procedure: 2 Wing No Parts Required Procedure Procedure 1. 1. Park the traction unit and attachment on a level surface. 2. Engage the traction unit parking brake. 3. Lower the attachment. 4.
PAGE 2
. Operation Use the hardware to secure the wings. Note: Install the spacer into the hole of the wing bracket. Raising the Wings Important: Raise both wings before transporting the attachment or removing the attachment from the traction unit. CAUTION Raising or lowering the wings can pinch or crush your hands. Keep away from the pivot points when raising or lowering the wings. 1.