Installation Instructions

ManualsBrandsToro ManualsAttachmentsTowable Manual Lift Kit, FieldCombo 770

FormNo.3444-690RevA

TowableManualLiftKit

FieldCombo770

ModelNo.46421

InstallationInstructions

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

Description

Qty.

Use

Nopartsrequired

–

Preparethemachine.

Towbar1

Toplink1

3-pointpin1

Linchpin1

Installthetowablemanualliftkit.

PreparingtheMachine

1.Parkthetractionunitandattachmentonalevel

surface.

2.Engagethetractionunitparkingbrake.

3.Lowertheattachment.

4.Shutoffthetraction-unitengineandremovethe

key.

5.Iftheattachmentisconnectedtoatractionunit,

disconnectit;refertotheOperator'sManualfor

theattachment.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com/bullseye.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3444-690*

Summary of content (4 pages)

PAGE 1
Form No. 3444-690 Rev A Towable Manual Lift Kit FieldCombo 770 Model No. 46421 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Use Qty. No parts required – Prepare the machine. Tow bar Top link 3-point pin Linchpin 1 1 1 1 Install the towable manual lift kit. Preparing the Machine 1. Park the traction unit and attachment on a level surface. 2. Engage the traction unit parking brake. 3. Lower the attachment. 4.
PAGE 2
Installing the Towable Manual Lift Kit 1. 3. Secure the tow bar to the brackets at the front of the attachment using the previously removed 2 clevis pins and 2 hairpin cotters (Figure 3). You may need to adjust the position of the 3-point arms for installing the tow bar. If needed, adjust the 3-point arms as follows: Support the rear of the attachment by sliding the adjustable leg on the attachment downward and secure it using the clevis pin and hairpin cotter (Figure 1). A.
PAGE 3
4. Secure the top link handle to the top link. 6. 5. Remove the 3-point pin and linchpin from the top of the attachment (Figure 4). Secure the upper portion of the top link to the attachment using the previously removed 3-point pin and linchpin (Figure 5). g350299 Figure 4 1. Linchpin 2. 3-point pin g350283 Figure 5 1. Top link 2. 3-point pin 3 3.
PAGE 4
7. Secure the bottom portion of the top link to the tow bar using the new 3-point pin and linchpin (Figure 6). 11. Rotate the top link to tension it (Figure 8). g350297 Figure 6 1. Linchpin 3. 3-point pin 2. Top link 8. Slowly back up the towing vehicle to the tow bar. 9. Engage the parking brake, shut off the engine, and remove the key on the towing vehicle. 10. g350298 Figure 8 Secure the tow bar to the hitch on the towing vehicle (Figure 7).