Operator's Manual

Figure1
1.Screw
AssemblingtheTrimmer
1.Slidetheupperpoleintothelowerpole,liningupthegroove
intheupperpolewiththegrooveinthelowerpole,and
secureitbytighteningthescrew.
Note:Usea10mmwrenchtotightenthescrew.
Note:Theupperpoleshouldbottomoutinthelower
pole.
Figure2
1.Upperpole
4.3mm(1/8inch)gap
2.Clamp
5.Lowerpole
3.Screw
2.Cutthecabletieandremoveitfromthetriggerhandle
(Figure3).
Figure3
1.Zip-tie
InstallingtheAuxiliaryHandle
1.Positiontheauxiliaryhandleontheshaftofthetrimmerwith
thesmoothsurfacefacingtheoperator(Figure4).
G017277
1
2
3
Figure4
1.Auxiliaryhandle3.Brace
2.Latch
2.Slidethebraceintotheauxiliaryhandlesothatthebrace
restsinthegroovealongtheshaft(Figure4).
3.Slidethelatchfromtheleftthroughthehandleandbrace
asshown,andtightenthelatchscrewwithaPhillips
screwdriver(Figure4).
InstallingtheGuard
1.RemovethePhillipsscrewtapedtotheguard(Figure5).
2.SlidetheguardontothetrimmerbaseasshowninFigure5.
5