Operator's Manual

Setup
1. Assembling the Blower
1. Install the blo w er tube .
2. Install the inlet co v er to the blo w er housing .
Figure 3
3. Snap the inlet co v er into place to secure it to the blo w er
housing .
Figure 4
Important: Y ou must install the blo w er tube bef or e
installing the inlet co v er because the inlet co v er hooks onto
the blo w er tube. T he blo w er will not r un unless the bottom
inlet co v er is lock ed in place.
2. Converting from Blower to
Vacuum
1. R emo v e the inlet co v er .
Figure 5
T he impeller r otates f or a few seconds after y ou tur n
of f the blo w er and can cut or injur e finger s.
Do not r emo v e the bottom inlet co v er when the motor
is r unning or when the unit is plug ged into a po w er
outlet.
2. R emo v e the blo w er tube .
3