Form No. 3424-856 Rev A PowerPlex 40V MAX Axial Blower Model No. 51690—Serial No. 319000001 and Up Model No. 51690T—Serial No. 319000001 and Up Register at www.Toro.com.
Important: With your mobile device, you can scan the QR code (if equipped) on the serial number plate to access warranty, parts, and other product information. If you have questions or problems, call toll free 1-888-367-6631 (US) or 1-888-430-1687 (Canada) before returning this product. WARNING CALIFORNIA Proposition 65 Warning The power cord on this product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
Safety enables better control of the power tool in unexpected situations. WARNING: When using electric gardening appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: E. Dress properly. Do not wear loose clothing or jewelry. Keep your hair tied back and keep your hair, clothing, and gloves away from venting areas Loose clothes, jewelry, or long hair can be caught in moving parts. F.
. 5. from those intended could result in a hazardous situation. I. Keep guards in place and in working order. Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Battery Safety A. Do not charge appliance in rain, or in wet locations. B. Do not use battery-operated appliance in the rain. C. Use only the following type and size battery(ies): Toro battery Model 88540 or 88541. D.
decal136-2476 136-2476 1. The battery pack is charging. 3. The battery pack is too warm. 2. The battery pack is fully charged. 4. Replace the battery pack. decal136-2534 136-2534 1. The battery does not come out of the box fully charged. 4. Stop—follow these instructions before first use. 2. Place the battery in the battery charger. 5. Read the Operator’s Manual. 3. Wait until the battery is fully charged before the first use. decal136-2533 136-2533 decal136-2539 136–2539 1.
Assembling the Blower Setup 1. Note: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 9). Slide the blower tube onto the blower housing. You may need to press down on the tab for the blower tube to lock into place (Figure 3). Mounting the Battery Charger (Optional) If desired, mount the battery charger securely on a wall using the wall-mount key holes on the back of the charger.
Product Overview Operation Specifications WARNING The blower can throw debris, possibly causing serious personal injury to you or bystanders. Appropriate Temperature Ranges Charge the battery at 0°C (32°F) to 40°C (104°F)* Use products at -15°C (5°F) to 60°C (140°F) Store products at -15°C (5°F) to 60°C (140°F) Unplug the charger if Below 0°C (32°F) or above 40°C (104°F) • Do not blow hard objects, such as nails, bolts, or rocks. • Do not operate the blower near bystanders or pets.
Adjusting the Air Speed of the Blower Removing the Battery from the Blower To accelerate the blower speed, press and hold the turbo boost button for the desired amount of time (Figure 5). Press down on the battery latch to separate the battery from the blower (Figure 7). To adjust the air speed as you blow, use the variable-speed trigger (Figure 5). To maintain the current air speed, engage the speed lock (Figure 5).
Charging the Battery Pack Important: Read all safety precautions. Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to Specifications (page 7). Note: At any time, press the battery-charge-indicator button on the battery pack to display the current charge (LED indicators). 1. Make sure that the vents on the battery are clear of any dust and debris. 2. Line up the cavity in the battery pack (Figure 9) with the tongue on the charger. g194423 Figure 10 1.
Preparing the Battery Pack for Recycling Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page 7). Important: Upon removal, cover the terminals of the battery pack with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components. Recycle or properly dispose of lithium-ion battery packs at a battery recycling facility.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The battery pack loses charge quickly. 1. The battery pack is over or under the appropriate temperature range. 1.
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.
