Form No. 3426-188 Rev C Flex-Force Power System™ 60V MAX Axial Blower Model No. 51820—Serial No. 319000001 and Up Model No. 51820T—Serial No. 319000001 and Up Register at www.Toro.com.
Safety For assistance, please see www.Toro.com/support for instructional videos or contact 1-888-384-9939 before returning this product. WARNING—When using electric gardening appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: IMPORTANT SAFETY INSTRUCTIONS WARNING I.
1 type of battery pack may create a risk of fire when used with another battery pack. 8. Charge the battery pack in a well-ventilated area only. 9. Do not expose a battery pack or battery charger to fire or to temperatures higher than 68°C (154°F). 10. Follow all charging instructions and do not charge the battery pack outside of the temperature range specified in the instructions. Otherwise, you may damage the battery pack and increase the risk of fire. 11.
9. Store an idle appliance indoors in a place that is dry, secure, and out of the reach of children. 6. Check the debris collector frequently for wear or deterioration and replace it when necessary. 7. Keep all fasteners on the appliance tight. 10. 8. Do not attempt to service or repair the appliance, battery pack, or battery charger except as indicated in the instructions.
decal139-5207 139-5207 1. Warning—read the Operator’s Manual; stay away from moving parts; keep all guards in place; wear eye protection; do not expose to rain. 3. Thrown object hazard—keep bystanders away. 2. Warning—keep bystanders away from the machine in all directions.
Assembling the Blower Setup 1. Note: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 8). Slide the blower tube onto the blower housing. You may need to press down on the tube latch for the blower tube to lock into place (Figure 2). Mounting the Battery Charger (Optional) If desired, mount the battery charger securely on a wall using the wall-mount key holes on the back of the charger. g273147 Figure 2 1.
Product Overview Operation Specifications WARNING The blower can throw debris, possibly causing serious personal injury to you or bystanders. Appropriate Temperature Ranges Charge/ store the battery pack at 5°C (41°F) to 40°C (104°F)* Use the battery pack at -30°C (-22°F) to 49°C (120°F) Use the blower at 0°C (32°F) to 49°C (120°F) Store the blower at 0°C (32°F) to 49°C (120°F)* • Do not blow hard objects, such as nails or bolts. • Do not operate the blower near bystanders or pets.
Adjusting the Air Speed of the Blower To achieve maximum performance (air speed) , press and hold the turbo boost button for the desired amount of time (Figure 4). To adjust the air speed as you blow, use the variable-speed trigger (Figure 4). g267488 To maintain the current air speed, engage the speed lock (Figure 4). Figure 6 1. Battery latch Shutting Off the Blower Charging the Battery Pack To shut off the blower, disengage the speed lock (if in use) and release the variable-speed trigger (Figure 4).
6. Refer to the following table to interpret the LED indicator light on the battery charger. Indicator light Indicates Off No battery pack inserted Green blinking Battery pack is charging Green Battery pack is charged Red Battery pack and/or battery charger is over or under the appropriate temperature range Red blinking Battery pack charging fault* *Refer to Troubleshooting (page 11) for more information. g282651 Figure 7 1. Battery pack cavity 4. Handle 2. Battery pack venting areas 5.
Preparing the Battery Pack for Recycling Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page 7). Important: Upon removal, cover the terminals of the battery pack with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem The tool does not start. Possible Cause Corrective Action 1. The battery is not fully installed in the tool. 1. Remove and then replace the battery into the tool, making sure that it is fully installed and latched. 2.
Problem Possible Cause Corrective Action It is difficult to remove the battery pack from the tool. 1. The battery pack/tool is new or there is corrosion in the battery terminals and/or the terminals on the tool. 1. Clean the terminals on the battery pack and the tool. Then apply dielectric grease to the battery terminals; do not use any other type of lubricant as it can damage the terminals. The speed lock does not hold when engaged. 1. The speed lock screw is loose. 1.
Notes:
Notes:
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.
