Form No. 3441-947 Rev B Flex-Force Power System™ 60V MAX Axial Blower Model No. 51824—Serial No. 321000001 and Up Model No. 51824T—Serial No. 321000001 and Up Register at www.Toro.com.
Safety For assistance, please see www.Toro.com/support for instructional videos or contact 1-888-384-9939 before returning this product. WARNING—When using electric gardening appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: IMPORTANT SAFETY INSTRUCTIONS WARNING I.
1 type of battery pack may create a risk of fire when used with another battery pack. 8. Charge the battery pack in a well-ventilated area only. 9. Do not expose a battery pack or battery charger to fire or to temperatures higher than 68°C (154°F). 10. Follow all charging instructions and do not charge the battery pack outside of the temperature range specified in the instructions. Otherwise, you may damage the battery pack and increase the risk of fire. 11.
9. Store an idle appliance indoors in a place that is dry, secure, and out of the reach of children. 6. Check the debris collector frequently for wear or deterioration and replace it when necessary. 7. Keep all fasteners on the appliance tight. 10. 8. Do not attempt to service or repair the appliance, battery pack, or battery charger except as indicated in the instructions.
decal137-9461 137-9461 1. Battery charge status decal140-8475 140-8475 1. Read the Operator’s Manual. 2. Call2Recycle® battery recycling program decal144-3094 144-3094 3. Keep away from open fire or flames. 4. Do not expose to rain. 1. The battery pack is charging. 3. The battery pack is over or under the appropriate temperature range. 2. The battery pack is fully charged. 4.
Setup Loose Parts Use the chart below to verify that all parts have been shipped. Description Blower tube Use Qty. 1 Assemble the blower. Note: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 8). Product Overview Assembling the Blower 1. Slide the blower tube onto the blower housing. You may need to press down on the tube latch for the blower tube to lock into place (Figure 1). g273147 Figure 1 1.
Specifications Operation Model 51824 Rated Voltage 60V DC maximum, 54 VDC nominal usage Charger Type 88602 or 88610 (included with 51824) Battery Type 88620 (included with 51824), 88625, 88650, 88660, or 88675 WARNING The blower can throw debris, possibly causing serious personal injury to you or bystanders. • Do not blow hard objects, such as nails or bolts. • Do not operate the blower near bystanders or pets.
Adjusting the Air Speed of the Blower To achieve maximum performance (air speed), press and hold the turbo boost button for the desired amount of time (Figure 5). To adjust the air speed as you blow, use the variable-speed trigger (Figure 5). g267488 To maintain the current air speed, engage the speed lock (Figure 5). Figure 7 1. Battery latch Shutting Off the Blower Charging the Battery Pack To shut off the blower, disengage the speed lock (if in use) and release the variable-speed trigger (Figure 5).
3. Slide the charger into the battery pack until it is fully seated (Figure 8). 4. To remove the charger, slide the charger backward out of the battery. 5. Refer to the following table to interpret the LED indicator light on the battery charger.
Preparing the Battery Pack for Recycling Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page 7). Important: Upon removal, cover the terminals of the battery pack with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components.
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem The tool does not start. Possible Cause Corrective Action 1. The battery is not fully installed in the tool. 1. Remove and then replace the battery into the tool, making sure that it is fully installed and latched. 2.
California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.
