Installation Guide

Dial Position: MANUAL PROGRAMS
The MANUAL PROGRAMS mode allows the immediate
start of an entire program (A, B or C). When using the
MANUAL PROGRAMS feature, the DDC will essentially override the
normal start time and begin immediately. Using MANUAL PROGRAMS does not
affect the previously scheduled run times. They will begin as programmed once the
MANUAL PROGRAMS feature has completed its cycle.
Press PROG to select the program you wish to operate.
The display will show all the stations programmed in the selected program
Press NEXT if you wish to select a different station as the 1st station.
Press +/ON to turn ON the sequence.
Press NEXT to skip from a station that is currently irrigating to the next one in the
sequence.
Press -/OFF to turn OFF the sequence (before it is completed).
The display will show the remaining RUN TIME of each operating station.
Press DIAL to advance to OFF.
Dial Position: OFF/ WATER OFF
3 main functions can be performed in this dial position.
ALL PROGRAMS OFF - Irrigation is suspended for all programs. It will remain
suspended as long as the DIAL stays in this position.
Press NEXT to set RAIN DELAY function OR Press DIAL to advance to AUTO-RUN
RAIN DELAY: - Irrigation is delayed for the selected number of days, 1 to 7 days.
Press +/ON or -/OFF to select the number of days.
The display will show the umbrella, DLY (Delay) and the day the irrigation will
resume (Flashing).
-9-
OFF
All Prog.
Rain Delay
0-7 days
Prog. Er.
Prog. A
Press
Prog. Er.
Prog. B
Press
Prog. Er.
Prog. C
Press