Service Manual

Special Tools
In addition to typical hand tools, the following special
tools are required to properly service these engines:
• Clutch Tool, P/N 147337 (Figure 1- 13) or P/N
180918 (Figure 1-14).
• Flywheel Holder, P/N 612470(Figure 1-15) or P/N
180919(Figure 1-16).
• Flywheel Strap Wrench or Spanner Wrench
(Commercially available).
• 0-250 in•lb (0-28.1 N•m) Torque Wrench
(Commercially available).
• Torx® Screwdriver or Bit Set (Commercially
available).
• Two-stroke, Magnetic Pick-up Tachometer
(Commercially available).
• Arbor or Hydraulic Press (Commercially
available).
• Bearing And Seal Pullers (Commercially
available).
Figure 1-13. Clutch Tool, P/N 147337.
Figure 1-14.Clutch Tool, P/N 180918.
Figure 1-15 Flywheel Holder, P/N 612470.
Figure 1-16 Flywheel Holder, P/N 180919.
3.6069.011
3.6051.022
3.6069.013
3.6051.023
1
GENERAL INFORMATION
1-15