Service Manual

Fuel Line And Filter Installation

1. Insert a piece of trimmer line through the hole in

the bottom of fuel tank to the filler opening. Slide

the fuel line over trimmer line.

2. Working through the filler neck, insert the fuel line

with the fuel filter and fitting attached through

the hole in the bottom of tank.

3. Work the fuel line from outside of tank, pulling

until the filter is seated against the bottom of the

tank

4. Slip the retainer over the fuel line and onto the fit-

ting protruding out of the bottom of the tank.

Reed And Reed Backup Plate Removal And

Installation

Reed And Reed Backup Removal

Trimmers And Cultivators, And Models 280,

300BV, 310, And 310BV Blowers And Blower/Vacs

1. Remove the screw(s) securing the reed and reed

backup to the carburetor mount/reed plate.

2. Remove the reed and reed backup.

DISASSEMBLE MAJOR

COMPONENTS (cont.)

2.6089.049

2.6089.051

3.6089.050

Fitting

Tank Wall

Fuel Line

Retainer

Filter

DISASSEMBLY, INSPECTION, & REPAIR

3-24