Service Manual

Blowers And Blower/Vacs—
Models 280, 300BV, 310, And 310BV
1. If necessary, disconnect the spark plug wire from
spark plug and remove the spark plug.
2. Install flywheel holder, P/N 612470.
3. Remove the crankshaft extension nut from crank-
shaft.
4. Remove the spacer sleeve from crankshaft.
5. Remove the screw securing the shroud extension
to the starter housing. Remove the shroud exten-
sion.
6. Remove the screws securing the starter housing
to the fan shroud. Remove the starter housing.
DISASSEMBLE MAJOR
COMPONENTS (cont.)
2.6089.068
2.6089.066
2.6089.067
Flywheel Holder
3
DISASSEMBLY, INSPECTION, & REPAIR
3-32