Service Manual

6. Press the crankshaft/bearing assembly into the
crankcase until the bearing is flush with the in-
ner surface of the crankcase.
7. Check the clearance between the inner
surface of the crankcase and the crankshaft
counterweight at several points
Recommended clearance is 0.030 in. (0.762 mm).
Adjust the location of the crankshaft/bearing if
necessary.
DISASSEMBLE ENGINE (cont.)
2.6089.105
2.6089.104
Bearing
Support
3
DISASSEMBLY, INSPECTION, & REPAIR
3-48