Service Manual

5. Lubricate the pin on crankshaft counterweight
with 2-Cycle engine oil. Slip the connecting rod
bearing over the pin.
6. Secure the crankcase to the cylinder with two
hex socket head screws.
Torque the screws to 110-120 in•lb
(12.4-13.5 N•m).
7. For Model 200/210 Blower— Install a new
crankcase cover gasket, the crankcase cover
(with flat inner surface towards cylinder), and
attaching screws.
Torque the screws to 67 in•lb (7.5 N•m).
ENGINE REASSEMBLY (cont.)
2.6089.114
2.6089.089
2.6089.090
4
REASSEMBLY
4-8