Service Manual

8. Make sure the spark plug gap is set to 0.025
inch (0.635 mm) using a wire feeler gauge.
Install the spark plug into cylinder and torque to
190-210 in•lb (21.4-23.6 N•m).
Install Fan Shroud
1. Install the fan shroud to crankcase with 4
screws.
2. Torque the screws to 110-120 in•lb (12.4-13.5
N•m).
Install Flywheel
WARNING: Cracked or Broken Cooling
Fins Are A Hazard!
Be careful not to crack or break any cooling fins. They
could fly off during operation. If cooling fins are
cracked or broken, replace the flywheel.
1. Install the crankshaft key into the keyway on
crankshaft.
ENGINE REASSEMBLY (cont.)
INSTALL MAJOR COMPONENTS
2.6089.086
2.6089.088
2.6089.087
4
REASSEMBLY
4-9