Service Manual

Torque the screws to 28-35 in•lb (3.2-3.9 N•m).

Remove the feeler gauge or shim stock.

5. Connect ignition switch lead wires as

necessary.

Install Starter Housing

Trimmers And Cultivators

1. If the unit is equipped with an ignition switch or push-

to-stop switch, connect the switch lead to the igni-

tion module.

2. Install the the starter housing to the fan shroud and

secure with four screws.

For Cultivators— Also install the fuel tank guard

bracket.

Torque the screws to 35-40 in•lb (3.9-4.5 N•m).

NOTE: It may be necessary to pull the starter

rope slightly to enable the starter housing to drop

into position.

INSTALL MAJOR COMPONENTS

(cont.)

2.6089.065

2.6089.064

2.6089.083

REASSEMBLY

4-12