Service Manual

4. Install the fastening screw through the starter hous-

ing and into the shroud extension.

Torque the screw to 25-35 in•lb (2.8-3.9 N•m).

5. Install the spacer sleeve over the crankshaft and in-

stall crankshaft extension nut.

6. Install the flywheel holder, P/N 612470.

Torque the crankshaft extension nut to

150-160 in•lb (16.9-18 N•m).

Install Clutch

Some units are equipped with a clutch. If no clutch ex-

ists proceed to “Install Muffler.”

1. Install the spacer sleeve over the crankshaft.

2. Install the clutch rotor to the crankshaft. Make

sure the side marked “OUT” is facing away from

the starter housing.

INSTALL MAJOR COMPONENTS

(cont.)

2.6089.120

2.6089.118

2.6089.119

Crankshaft

Extension Nut

Spacer Sleeve

Flywheel

Holder

REASSEMBLY

4-14