Service Manual

Install Fuel Tank And Carburetor Mount/Reed Plate

Trimmers And Cultivators

1. Install the rubber fuel tank mounting pads to the

fan shroud and carburetor mount/reed plate.

2. Position the fuel tank against the fan shroud.

Install a new carburetor mount/reed plate

gasket, the carburetor mount/reed plate, and

attaching screws.

Torque the screws to 60-65 in•lb (6.8-7.3 N•m).

Blowers And Bower/Vacs

The fuel tank on blowers and blower/vacs is held in

place by the engine side covers. Install the fuel tank

when installing the side covers.

Install the carburetor mount/reed plate as follows:

Models 280, 300BV, 310, And 310BV

1. Install a new carburetor mount/reed plate

gasket, carburetor mount/reed plate,

carburetor grounding lead tab terminal, and at-

taching screws

2. Torque the screws to 60-65 in•lb (6.8-7.3 N•m).

INSTALL MAJOR COMPONENTS

(cont.)

2.6081.046

2.6089.125

2.6081.045

Ground Tab

REASSEMBLY

4-17