Service Manual

3. Install the engine onto the trimmer flex drive

housing. Make sure the flex drive shaft mates

with the square drive of engine. Make sure the

slot in the flex drive housing aligns with the

boss in the clutch cover/starter housing.

4. Install the anti-rotation screw through clamp and

into boom.

Torque the anti-rotation screw to 15-20 in•lb

(1.7-2.3 N•m).

5. Torque the nut and bolt of clamp assembly to 70-

80 in•lb (7.9-9.0 N•m).

6. Install the throttle control cable and insert it

through the hole in the swivel on carburetor

throttle lever.

Make sure the outer cover of throttle cable seats

in back of the carburetor mount/reed plate.

7. Adjust the throttle control cable in the swivel for

the full range of throttle travel.

Torque the screw in the swivel to 9-12 in•lb

(1.0-1.4 N•m).

INSTALL MAJOR COMPONENTS

(cont.)

2.6081.015

3.6081.016

2.6090.136

Anti-Rotation

Screw

Drive Housing

Clamp

REASSEMBLY

4-25