Service Manual

5. Remove the inner seal from crankcase.

Inspection

1. Inspect the crankcase for nicks, cracks, and defor-

mation. Replace if necessary.

2. Inspect the crankshaft for nicks, cracks,

roundness and deformation. Replace if

necessary.

Crankcase Reassembly

NOTE: To prevent bearing damage, make sure

bearings are fully supported on both the inner and

outer races during all pressing operations.

Make sure the inner surface of crankcase and mat-

ing surfaces of bearings and seal are clean, dry, and

free from grease and oil.

DISASSEMBLE ENGINE (cont.)

3.6090.129

2.6089.099

2.6090.133

DISASSEMBLY, INSPECTION, & REPAIR

3-46