Service Manual

Trimmers And Cultivators, And Models 280, 300BV,

310, And 310BV Blowers And Blower/Vacs

1. If applicable, make sure the curve of the reed

valve is down.

2. Install the reed, reed backup, and reed mounting

screw(s).

Torque the screw(s) to 15-20 in•lb (1.7-2.3 N•m).

Model 200/210 Blower

1. Install the reed valve seat gasket and valve seat.

2. Make sure the curve of the reed valve is in the di-

rection shown in

3. Install the reed, reed backup, and reed mounting

screw(s).

Torque the screw(s) to 15-20 in•lb (1.7-2.3 N•m)

Remove Muffler

1. Remove the muffler mounting bolts.

2. Remove the muffler (with heat shield) and

gasket. Discard the old gasket.

DISASSEMBLE MAJOR

COMPONENTS (cont.)

2.6089.051

2.6089.054

2.6089.052

DISASSEMBLY, INSPECTION, & REPAIR

3-26