Service Manual

3. Install the flywheel holder, P/N 612470.

Using clutch tool, P/N 147337, torque the clutch ro-

tor to 150-160 in•lb (16.9-18 N•m).

4. Apply a small amount of Loctite® #271 to the

female threads of crankshaft.

5. Install the clutch drum to the crankshaft.

Torque the screw inside clutch drum to 38-44 in•lb

(4.3-5.0 N•m).

6. Remove the flywheel holder.

7. Position the raised boss inside the “snout” of the

clutch cover towards the rope pull handle. In-

stall the clutch cover to the starter housing

and secure with four screws.

Torque the screws to 35-40 in•lb (3.9-4.5 N•m).

INSTALL MAJOR COMPONENTS

(cont.)

2.6089.121

Clutch Tool

2.6089.060

2.6089.122

Flywheel

Holder

REASSEMBLY

4-15