Installation Instructions

2
Figure 4
2. Secure mounting frame to grass catcher cover frame
with 2 capscrews (3/8 x 1 in.), flat washers, and
locknuts (Fig. 5). Position the washers on the top side
of the assembly. Tighten all mounting fasteners.
Figure 5
Installing the Grass Catcher and Bags
1. Slide grass catcher mounting pin into mounting hole in
hitch (Fig. 6).
Figure 6
2. Rotate grass catcher up so mounting pins line up with
mounting holes in tractor mounting bracket or rider
stand bars. Push pins through holes and retain with
hairpin cotters (Fig. 7).
Figure 7
3. Slide grass bag under bag frame cover, positioning
front edge of bag rod into screen support bracket on
bag frame (Fig. 8).
Figure 8
4. Lift rear of bag up to bag cover. Squeeze bag handles,
allowing them to be positioned in bag frame brackets.
Release bag handles, locking them in brackets (Fig. 9).