Installation and User's Guide

SET ZONE TIMES Setup

The SET ZONE TIMES setup tells the controller how much time each station will be

activated (runtime).

Step 1 – Place the function dial to the SET ZONE TIMES position.

Step 2 – Press

PRG

to select the program being modiﬁed. Select from A, B or C.

Step 3 – Press or to select the Zone (station) number (1–6) being modiﬁed.

Step 4 – Press or to adjust the desired time duration (runtime) you want the station to

be active. Each station can have a runtime of one minute and up to six hours. For

unused stations, adjust the runtime to 0:00.

Step 5 – Repeat steps 2–4 for the remaining stations and programs.

Step 6 – Return the function dial to RUN when ﬁnished.

MinutesHours