Installation and User's Guide

SEASON ADJUST Setup

SEASON ADJUST enables you to conveniently decrease or increase the ZONE TIME (run

time) currently set for each of the programs. The adjustment can be made in 10% increments

from 0% (OFF) to 200% of the normal (100%) run time.

SEASON ADJUST is a universal setting which will affect all three (A, B and C)

programs.

Step 1 – Place the function dial to the SEASON ADJUST position.

Step 2 – Press or to adjust to the desired adjustment percentage; i.e., 90% equals 10%

reduction of station run time and 200% will double the station run time.

Step 3 – Return the function dial to RUN when ﬁnished.

MANUAL STATION Operation

MANUAL STATION operation enables you to activate any station and give a temporary run

time duration. Only one station can be activated by the MANUAL STATION operation. Any

run time adjustment made in MANUAL STATION is temporary and will not affect the actual

run times in the programs.

Step 1 – Place the function dial to the MANUAL STATION position.

Step 2 – Press to activate MANUAL STATION operation.

Step 3 – Press or to select the Station number being activated.

Step 4 – Press or to adjust the desired run time duration.

Step 5 – Turn the function dial slowly to the RUN position to activate. The selected

station will be activated until the set run time expires, then the controller will revert

to normal operation.