Operator's Manual

4.Sliptherearbeltovertheidlerpulleyandalignthebelt
totherearpulleygroove.
5.Sliptheforwardbeltoverthemotorpulleyandalign
thebelttotheforwardpulleygroove.
6.Checkthebelttension;refertostep1,step2,andstep
3inAdjustingtheBeltTension(page25).
7.Looselysecurethebeltguidetothemotor(Figure37)
withtheboltthatwasremovedinstep3ofRemoving
theBelts(page26).
8.Adjustthebeltguide;refertoAdjustingtheBeltGuide
(page27).
9.Installthedividerplate;refertoInstallingtheDivider
Plate(page23).
AdjustingtheBeltGuide
Note:Toaccessthebeltguide,removethedividerplate;
refertoRemovingtheDividerPlate(page22).
Guideairgap:2.5to4.0mm(3/32to5/32inch)
1.EnsurethattheclutchleverisintheONposition;refer
toControllingthePaddles(page19).
2.Ensurethatthebelttensioniscorrect;referto
AdjustingtheBeltTension(page25).
3.Checkthattheairgapbetweenthebeltguideandthe
beltsis2.5to4.0mm(3/32to5/32inch);referto
Figure39.
G020666
3 4
5
1
2
Figure39
1.Motorpulleys4.Beltguide
2.Belts5.Nut
3.Guideairgap:2.5to4.0
mm(3/32to5/32inch)
4.Iftheairgapisnotwithinthespeciedrange,dothe
following:
A.Loosenthenutthatsecuresthebeltguidetothe
motor(Figure39).
Important:Ensurethatthebeltguideis
towardthemotorpulley.
B.Rotatethebeltguideupordownuntilthereis
anairgapof2.5to4.0mm(3/32to5/32inch)
betweentheguideandeachbelt(Figure39).
Important:Thebeltguideshouldnot
contactthebeltswiththeclutchleverinthe
ONposition.
Note:Iftheairgapbetweenthebeltguideand
bothbeltscannotbeattained,then1ofthebelts
istoolong.
C.Tightenthenutthatsecuresthebeltguidetothe
motor(Figure39).
D.Checktheclutchoperation;refertoCheckingthe
ClutchOperation(page27).
5.Installthedividerplate;refertoInstallingtheDivider
Plate(page23).
CheckingtheClutchOperation
ServiceInterval:Every40hours—Checktheclutch
operation.
Important:Thepaddlesmustnotrotateinanempty
drumwhentheclutchleverisintheOFFposition.
1.MovetheclutchlevertotheOFFposition;referto
ControllingthePaddles(page19).
2.Startthemotor;refertoStartingtheMotor(page19).
3.IfthepaddlesrotatewiththeclutchlevertotheOFF
positiondothefollowing:
A.Stopthemotor;refertoStoppingtheMotor
(page19).
B.Checktheairgapbetweenthebeltguideandthe
belts.
Note:Iftheairgapislargerthan4.0mm(5/32
inch),decreasethegapbetweenthebeltguide
andthebelts;refertoAdjustingtheBeltGuide
(page27).
4.Repeatsteps1,2,and3untilthefollowingconditions
aremet:
•TheclutchleverisintheOFFposition.
•Whilethemotorisrunning,thepaddlesdonot
rotateinanemptydrum.
27