Operator's Manual

PoweringtheMachinewitha
PortableGenerator
Whenusingaportablegeneratorasanelectrical
source,ensurethefollowingpoweroutput
specications:
ModelVoltageAmperesKilowatt
hour
Frequency/
phase
68012
115V/
230V
19A/
9.5A
2.2to2.3
Kw
60Hz/
single
68018
115V/
230V
19A/
9.5A
2.2to2.3
Kw
60Hz/
single
68019
115V/
230V
24A/
12A
2.2to2.3
Kw
60Hz/
single
ResettingtheMotor
Theelectricalmotorforthemachineisequippedwith
adeviceforthermal-overloadprotection.Intheevent
thatthemotorshutsdownautomatically,resetthe
thermal-overloadprotectorasfollows:
1.MovetheON/OFFswitchtotheOFFposition;
refertoFigure12.
2.Disconnecttheelectricalplugforthemachine
fromthepowersource(Figure25).
g020654
Figure25
1.Thermal-overload
protectorresetbutton
3.Electricalplug
2.ON/OFFswitch
3.Allowtheelectricmotorofthemachinetocool
untilitiswarmtothetouchorcooler.
Important:Ensurethatthepaddlesspin
freely.Checkforstone,masonry,orconcrete
materialbetweenthepaddlesandthedrum.
4.Onthesideofthejunctionboxforthemotor,
presstheresetbuttonforthethermal-overload
protector(Figure25).
5.Connecttheelectricalplugforthemachineto
thepowersource.
6.RotatetheON/OFFswitchtotheONpositionand
ensurethatthemotorstartsnormally.
7.RotatetheON/OFFswitchtotheOFFposition.
StartingandStoppingthe
Motor
StartingtheMotor
1.Plugthepowercordintoaproperelectrical
outlet.
2.SwitchtheON/OFFswitchtotheONposition.
3.MovetheclutchlevertotheONposition;referto
ControllingthePaddles(page21)
StoppingtheMotor
WARNING
Inanemergencysituation,stopthemotor
immediately.
1.MovetheclutchlevertotheOFFposition;refer
toControllingthePaddles(page21).
2.SwitchtheON/OFFswitchtotheOFFposition;
refertoMotorON/OFFSwitch(page12).
3.Unplugthepowercord.
ControllingthePaddles
DANGER
Thismachineiscapableofamputatinghands.
•Stayintheoperator’spositionwhilethe
machineisrunning.
•Keepallbystandersasafedistancefrom
themachine.
•Stopthemachineimmediatelyifany
peopleoranimalsentertheworkarea.
•Neverplaceanypartofyourbodyintoa
positionthatcausesanunsafeoperating
condition.
21