Operator's Manual

Maintenance
Important:Beforeperforminganymaintenanceprocedures,rststopthemotor,wait5minutesto
allowallmovingpartstocometoacompletestopandcool,andunplugthepowercord.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst10hours
•Checkthetensionofthedrivechain,andadjustitasneeded.
Aftertherst25hours
•Inspectthebeltsandadjustasnecessary.
Beforeeachuseordaily
•Inspectthetiresandwheels.
Aftereachuse
•T orquethelugnutsto108to122N-m(80to90ft-lb)aftertowing.
•Cleanthedrumbetweenmixingbatchesofmaterial.
•Lubricatethetrunnions.
•Cleanthemachine.
Every40hours
•Lubricatethedrivechainwithanon-stickychainlubricant.
•Inspectthebeltsandadjustasnecessary.
•Checktheclutchoperation.
Every50hours
•Checkthetensionofthedrivechain,andadjustitasneeded.
Every6,000hours
•Lubricatethemotorbearings.
Monthly
•Lubricatethepillow-blockbearings.
Every2years
•Replacethebelts.
Pre-Maintenance
Procedures
PreparingtheMachinefor
Maintenance
1.Parkthemachineonalevelsurface.
2.Removethemachinefromthetowvehicle.
3.Chockthetires.
4.Opentherearcowl;refertoOpeningtheCowl
(page19).
5.Turnoffandunplugthemotor;refertoStopping
theMotor(page21).
6.Ensurethatthemotoriscool.
RemovingandInstalling
theDividerPlate
Youneedtoremovethedividerplatetoprovideaccess
beforeperformingsomemaintenanceprocedures.
RemovingtheDividerPlate
1.Unlatchandopenthecowl;refertoOpeningthe
Cowl(page19).
2.Useawrenchtoremovethe4boltsthatsecure
thedividerplatetothefrontcowl.
Note:Keeptheboltsforinstallingthedivider
plate.
g021585
Figure29
3.Toremovethedividerplate,liftitupwardand
rotateitcounterclockwisesothatitclears
variouscomponents.
25