Operator's Manual

3.Removethenutthatsecuresthebeltguideto
themotor,andremovethebeltguide(Figure
37).
g021601
Figure37
1.Nut2.Beltguide
4.Sliptheforwardbeltforwardandofftheidler
pulley(Figure38).
g021608
Figure38
1.Motorpulley3.Idlerpulley
2.Forwardbelt4.Rearbelt
5.Sliptherearbeltrearwardandofftheidlerpulley
(Figure38).
6.Slipthebeltsoffthemotorpulley.
7.Removethebeltsfromthemachine.
InstallingtheBelts
1.EnsurethattheclutchleverisintheOFF
position;refertoControllingthePaddles(page
21).
2.Aligntherearbelttothereargrooveinthemotor
pulley.
Note:Donotaligntherearbelttotheidler
pulley.
3.Aligntheforwardbelttotheforwardgrooveof
theidlerpulley.
4.Sliptherearbeltovertheidlerpulleyandalign
thebelttotherearpulleygroove.
5.Sliptheforwardbeltoverthemotorpulleyand
alignthebelttotheforwardpulleygroove.
6.Checkthebelttension;refertostep1,step2,
andstep3inAdjustingtheBeltT ension(page
28).
7.Looselysecurethebeltguidetothemotor
(Figure37)withtheboltthatwasremovedin
step3ofRemovingtheBelts(page29).
8.Adjustthebeltguide;refertoAdjustingtheBelt
Guide(page30).
9.Installthedividerplate;refertoInstallingthe
DividerPlate(page26).
AdjustingtheBeltGuide
Note:T oaccessthebeltguide,removethedivider
plate;refertoRemovingtheDividerPlate(page25).
Guideairgap:2.5to4.0mm(3/32to5/32inch)
1.EnsurethattheclutchleverisintheONposition;
refertoControllingthePaddles(page21).
2.Ensurethatthebelttensioniscorrect;referto
AdjustingtheBeltT ension(page28).
3.Checkthattheairgapbetweenthebeltguide
andthebeltsis2.5to4.0mm(3/32to5/32
inch);refertoFigure39.
g020666
Figure39
1.Motorpulleys4.Beltguide
2.Belts5.Nut
3.Guideairgap:2.5to4.0
mm(3/32to5/32inch)
30